I. operation notes
1, head motor, no foreign body, away from the motor, so as to avoid danger.
2, mix glue or blunt gun (rinse glue mixer, glue mouth) when, must move head to track end, use glue board to catch the glue that releases inside glue mouth, lest pollute equipment.
3. front of the nose to detect glass switch, light eye can not have glue, or else work by mistake.
4, the operation parameters are set on the control box PC display screen, according to the need to select the set value, do not arbitrarily set, so as to avoid the controller to send wrong information, affect the quality of glue or damage equipment.
5, mixing glue or gun, must first open plastic mouth control valve, and then open the glue machine, so as to avoid pressure surge, damage to equipment or safety incidents.
6, the suction cup can not put lime powder, if there is glue, please clean up, if some glass edge just put into the center of the sucker, can adjust the suction cup move around
7, glue, we must help good glass, to prevent glass from positioning, affecting the quality of glue.
8, when the gun, first off the nose on the B glue out valve, turn off the B glue pump, and then open the B glue reflux valve, and finally blunt gun, rinse to the glue mouth, no black glue, rinse to finish.
9, three glass to the aluminum frame detection probe off off, when the installation of double glass.
10, rubber and both sides of the scraping board, such as glue for a long time to clean up.
Two 、 maintenance and maintenance
1 、 regularly check whether the electrical wiring is loose and the reliability of the grounding.
2, after a period of operation of the new machine, should be fully checked whether the fasteners are loose, and re tightened.
3, regular cleaning of rubber mixing device and its front and back pipes of condensation glue, regularly cleaning the check valve; found resistance increased or blocked phenomenon, should promptly clean up.
4. After each use, remove the residual glue and dust from the machine and keep the machine clean.
This article is made up of a two component press machine. Our website is: http://www./, we will provide you with better service with your wholehearted enthusiasm, and welcome your visit!