The solenoid valve is an industrial equipment used by electromagnetic control. It is an automatic basic element used to control the fluid. It belongs to the actuator and is not limited to hydraulic and pneumatic. It is used to adjust the direction, flow, speed and other parameters of the medium in the industrial control system.
The solenoid valve can be matched with different circuits to achieve the desired control, and the precision and flexibility of the control can be guaranteed. Because of the many advantages of the solenoid valve, it is also used in our glue machine. The following small editor will tell you how to maintain the solenoid valve.
To carry out maintenance and maintenance in operation is not very difficult and complex to the solenoid valve, we should according to the composition of coating machine and various glue machine parts, solenoid valve maintenance: solenoid valve for gas transfer tasks, provide compressed gas needs:
1, there should be enough pressure. At the same time, when connecting the pipe, we should not exceed the tooth surface of the joint and eliminate all kinds of metal dust dirt in the pipe connection.
At ordinary times in maintenance, just do the cleaning of the connection pipe and pay attention to the good rules of the joint.
2, repair the valve core to open the solenoid valve, and should pay attention to the replacement of the seal ring, at the same time, after each cleaning to add a small amount of lubricating oil after the reloading.
Pay attention to the replacement of the sealing ring of the solenoid valve at ordinary times. In general, all kinds of electrical problems arise from this.
The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://www. thank you for your arrival!